2.2 在窗口中输出文字

输出文字一般使用CDC::BOOL TextOut( int x, int y, const CString& str )和CDC::int DrawText( const CString& str, LPRECT lpRect, UINT nFormat )两个函数，对TextOut来讲只能输出单行的文字，而DrawText可以指定在一个矩形中输出单行或多行文字，并且可以规定对齐方式和使用何种风格。nFormat可以是多种以下标记的组合（利用位或操作）以达到选择输出风格的目的。

• DT_BOTTOM底部对齐   Specifies bottom-justified text. This value must be combined with DT_SINGLELINE.
  
  
  
• DT_CALCRECT计算指定文字时所需要矩形尺寸   Determines the width and height of the rectangle. If there are multiple lines of text, DrawText will use the width of the rectangle pointed to by lpRect and extend the base of the rectangle to bound the last line of text. If there is only one line of text, DrawText will modify the right side of the rectangle so that it bounds the last character in the line. In either case, DrawText returns the height of the formatted text, but does not draw the text.
  
  
  
• DT_CENTER中部对齐   Centers text horizontally.
  
  
  
• DT_END_ELLIPSIS or DT_PATH_ELLIPSIS   Replaces part of the given string with ellipses, if necessary, so that the result fits in the specified rectangle. The given string is not modified unless the DT_MODIFYSTRING flag is specified.
  

  You can specify DT_END_ELLIPSIS to replace characters at the end of the string, or DT_PATH_ELLIPSIS to replace characters in the middle of the string. If the string contains backslash (\) characters, DT_PATH_ELLIPSIS preserves as much as possible of the text after the last backslash.

  
  
• DT_EXPANDTABS   Expands tab characters. The default number of characters per tab is eight.
  
  
  
• DT_EXTERNALLEADING   Includes the font抯 external leading in the line height. Normally, external leading is not included in the height of a line of text.
  
  
  
• DT_LEFT左对齐   Aligns text flush-left.
  
  
  
• DT_MODIFYSTRING   Modifies the given string to match the displayed text. This flag has no effect unless the DT_END_ELLIPSIS or DT_PATH_ELLIPSIS flag is specified.
  

  Note Some uFormat flag combinations can cause the passed string to be modified. Using DT_MODIFYSTRING with either DT_END_ELLIPSIS or DT_PATH_ELLIPSIS may cause the string to be modified, causing an assertion in the CString override.

  
  
  
  
• DT_NOCLIP   Draws without clipping. DrawText is somewhat faster when DT_NOCLIP is used.
  
  
  
• DT_NOPREFIX禁止使用&前缀   Turns off processing of prefix characters. Normally, DrawText interprets the ampersand (&) mnemonic-prefix character as a directive to underscore the character that follows, and the two-ampersand (&&) mnemonic-prefix characters as a directive to print a single ampersand. By specifying DT_NOPREFIX, this processing is turned off.
  
  
  
• DT_PATH_ELLIPSIS   
  
  
  
• DT_RIGHT右对齐   Aligns text flush-right.
  
  
  
• DT_SINGLELINE单行输出   Specifies single line only. Carriage returns and linefeeds do not break the line.
  
  
  
• DT_TABSTOP设置TAB字符所占宽度   Sets tab stops. The high-order byte of nFormat is the number of characters for each tab. The default number of characters per tab is eight.
  
  
  
• DT_TOP定部对齐   Specifies top-justified text (single line only).
  
  
  
• DT_VCENTER中部对齐   Specifies vertically centered text (single line only).
  
  
  
• DT_WORDBREAK每行只在单词间被折行   Specifies word-breaking. Lines are automatically broken between words if a word would extend past the edge of the rectangle specified by lpRect. A carriage return杔inefeed sequence will also break the line.

在输出文字时如果希望改变文字的颜色，你可以利用CDC::SetTextColor( COLORREF crColor )进行设置，如果你希望改变背景色就利用CDC::SetBkColor( COLORREF crColor )，很多时候你可能需要透明的背景色你可以利用CDC::SetBkMode( int nBkMode )设置，可接受的参数有

• OPAQUE   Background is filled with the current background color before the text, hatched brush, or pen is drawn. This is the default background mode.
  
  
  
• TRANSPARENT   Background is not changed before drawing.

接下来讲讲如何创建字体，你可以创建的字体有两种：库存字体CDC::CreateStockObject( int nIndex )和自定义字体。
在创建非库存字体时需要填充一个LOGFONT结构并使用CFont::CreateFontIndirect(const LOGFONT* lpLogFont )，或使用CFont::CreateFont( int nHeight, int nWidth, int nEscapement, int nOrientation, int nWeight, BYTE bItalic, BYTE bUnderline, BYTE cStrikeOut, BYTE nCharSet, BYTE nOutPrecision, BYTE nClipPrecision, BYTE nQuality, BYTE nPitchAndFamily, LPCTSTR lpszFacename )其中的参数和LOGFONT中的分量有一定的对应关系。下面分别讲解参数的意义：

nHeight 字体高度（逻辑单位）等于零为缺省高度，否则取绝对值并和可用的字体高度进行匹配。
nWidth 宽度（逻辑单位）如果为零则使用可用的横纵比进行匹配。
nEscapement 出口矢量与X轴间的角度
nOrientation 字体基线与X轴间的角度
nWeight 字体粗细，可取以下值

• DEFAULT_QUALITY   Appearance of the font does not matter.
  
  
  
• DRAFT_QUALITY   Appearance of the font is less important than when PROOF_QUALITY is used. For GDI raster fonts, scaling is enabled. Bold, italic, underline, and strikeout fonts are synthesized if necessary.
  
  
  
• PROOF_QUALITY   Character quality of the font is more important than exact matching of the logical-font attributes. For GDI raster fonts, scaling is disabled and the font closest in size is chosen. Bold, italic, underline, and strikeout fonts are synthesized if necessary.

此外可以利用CFontDialog来得到用户选择的字体的LOGFONT数据。

最后我讲一下文本坐标的计算，利用CDC::GetTextExtent( const CString& str )可以得到字符串的在输出时所占用的宽度和高度，这样就可以在手工输出多行文字时使用正确的行距。另外如果需要更精确的对字体高度和宽度进行计算就需要使用CDC::GetTextMetrics( LPTEXTMETRIC lpMetrics ) 该函数将会填充TEXTMETRIC结构，该结构中的分量可以非常精确的描述字体的各种属性。